Made from silver, anodised aluminium, the economy water fed pole is made in 8 x 6 sections and can reach up to the fourth and fifth floor of most buildings.

• The individual sections of the water fed pole can be easily and quickly removed to lighten the overall weight of the pole at lower heights.
• The economy water fed pole features clamps made from stainless steel with welded thumb plates (easy to replace or service)
• The economy water fed pole includes an aluminium gooseneck. (Brush can be easily removed)
• Includes a sufficient amount of hose with an aluminium connector and 2mm jets.
• Handle of water fed pole diameter is easy on the hands at 50mm

Overall Weight of Water Fed Pole:-  6.15kg

Closed length of Water Fed Pole:- 2360mm/93” (Including gooseneck and brush)

It might surprise you to learn this water fed pole is made from the same material as aircraft wings. If looked after, you can expect up to ten or twenty years use from these low budget water fed poles. All eight individual sections of the water fed pole are removable and are the exact same length (6 ft long) The economy water fed pole should fit most small vehicles, making transportation easy and safe.

Each section of the economy water fed pole is replacable, and the good news is that you can easily do it yourself and not have to pay anything extra for a servicing. Each individual section of the water fed pole overlaps the next by approximately nine inches, making the pole quite rigid. Although at a maximum height of 45ft, the water fed pole will become quite flexible, it is still very easy to control and maneuver. Each section of the water fed pole has a pilot hole to identify the maximum point at which to tighten the clamp.

Click here to purchase the 45ft Economy Water Fed Pole.